9 hp Wood Chipper Shredder, Gas Honda Engine

$2,175.00

Part Number: CSV-3090H Categories: ,

SAVE NOW by getting FREE SHIPPING on all parts and accessories ordered at the time of your unit purchase!

Amazon Pay Available At Checkout Buy factory direct & use Amazon Pay(select Amazon Pay at Checkout)


We ship WORLDWIDE. For locations outside the 48 contiguous United States and Canada, click here to Contact Us for best available options and rates.

Upgrade to Patriot’s very best wood chipper featuring a slick Honda engine and our only chipper with a heavy duty tri-plate rotor.

  • 9 hp Honda GX series commercial grade gas engine
    THIS ENGINE IS 50 STATE COMPLIANT
  • Chips rigid materials such as branches up to 3 inches in diameter
  • Ultimate wood chipper for professional debris chipping
  • Extremely powerful, destroying branches, pine cones, and walnuts ferociously

Click here for detailed gas wood chipper leaf shredder assembly instructions

Description

Patriot Model CSV-3090H
9 hp Gas Wood Chipper Leaf Shredder

Branch after branch, day after day, the CSV-3090H Wood Chipper Leaf Shredder brings strength and efficiency to the big jobs. This unit combines Honda’s smooth quiet power to Patriot’s rugged, heavy duty, tri-plated rotor. This combination gives you low oil shutdown, durable solid rubber tires, and 3 inch diameter chipping capacity. Patriot’s triple-layered rotor is laminated for greater strength. A greasable outboard bearing supports the rotor, taking the load off the engine shaft for longer life and smoother running. If you like Honda’s reliability and like to tackle the really big jobs this is your machine. This unit weighs 149 lbs and will chip all day long.

Click above on the WHY PATRIOT tab to see detailed product information and why you should buy a Patriot

See video of Patriot products in action

Click here to see Patriot chipper shredder output samples

Part No. Description – Click below on the product descriptions to see product details or to order Price
CSV-3090H Patriot Model CSV-3090H Gas Wood Chipper Leaf Shredder $2175.00
RECOMMENDED ACCESSORIES
888000266 Patriot Mini Grease Gun
NOTE: THE OUTBOARD BEARING OF YOUR PATRIOT WOOD CHIPPER SHOULD BE LUBRICATED AFTER EVERY 20 HOURS OF OPERATION.
$29.95
888000227 Patriot CSV Chipper Buddy $75.00
OTHER POPULAR ACCESSORIES
888000061 Spare “Standard” CSV Collection Bag $60.00
888000100 “Jumbo” CSV Leaf Collection Bag $70.00
888000232 Gator Grabber $75.00
888000082 CSV Cover $85.00
888000064 CSV Tow Bar $180.00
RECOMMENDED SPARE PARTS
990000015 Spare Chipper Knife Kit For CSV-3090H
NOTE: THE CHIPPING KNIVES OF YOUR PATRIOT WOOD CHIPPER SHOULD BE SHARPENED AFTER EVERY 6 TO 8 HOURS OF ACTUAL CHIPPING TIME. Frequently, customers that plan to do a lot of chipping will order a spare knife kit so they don’t have to stop in the middle of a project to sharpen the knives.
$85.00
993090035 Spare Shredding Y-hammers Kit For CSV-3090H $85.00

Additional information

Weight 148 lbs
Dimensions 24 × 26 × 28 in

Why Patriot?

Why Buy a CSV-3090H


Is this the right model for you?

The CSV-3090H is our top-of-the-line chipper. Our model CSV-3090H is ideally suited for the “heavily wooded lot” property owner (over 1 acre) or for light commercial applications such as a small landscaper or rental center where the primary intent is to use this machine to chip up larger volumes of branches (up to 3″ in diameter) and to shred up leaves and other vegetative matter generated during routine yard maintenance. The construction of the CSV-3090H is similar to that of the CSV-3100B. However, there are two key differences in the rotor and the engine that are detailed below.

Why Buy A Patriot?

Easy to Load Shredding Hopper

Patriot’s CSV-3090H has a large hopper to allow easy loading of leaves and vegetative material into the machine for shredding. The opening at the top of the hopper is 16″ long and 14″ wide so you can easily deposit debris for processing.

See video of Patriot’s products in action

Just for reference, the opening at the base of the hopper narrows to 7″ long x 2″ wide. So if you were hoping to shred whole coconuts or grapefruit, this isn’t the machine for you.

Tapered Chipping Cone

Patriot’s CSV-3090H has a tapered chipping cone that makes it easy to feed rigid materials such as branches and sunflower or corn stalks into the chipper. The opening at the top of the cone is 7″ in diameter so you can easily deposit debris for processing without pruning them down to perfectly straight pieces with no offshoots.

See video of Patriot’s products in action

The opening at the base of the cone limits the diameter of materials to be chipped to 3″.

Standard Gas Rotor Profile
Tri-plate Gas Rotor Profile
Rotor Y-hammers
Heavy Rotor

Now that your yard waste has safely entered our CSV-3090H wood chipper leaf shredder it meets a formidable opponent, the rotor. Weighing in at just over 27 pounds and measuring roughly 14″ in diameter, this is where things happen!

In this photo you see the front of the rotor and this unit’s two chipping knives (painted blue here for ease of identification). Patriot’s chipping knives are made of high quality tool steel, selected for its toughness, and are heat treated for wear resistance. Spinning past the end of the chipping cone the chipping knife is ready, willing, and able to turn your freshly pruned branches into coin-sized chips that make great mulch. These knives can reduce the volume of your freshly pruned branches by as much as 20:1. To sharpen the knives, simply remove the 3 nuts that attach the chipper cone to the housing and the 2 screws that attach each of the knives to the rotor. Sharpen using a simple wet stone or high quality file.

Click here to see Patriot chipper shredder output samples

At first glance, this appears to be the same rotor that is found in the CSV-3065B and CSV-3100B. However, upon closer inspection, you’ll see that there is an extra layer of steel where the chipping knives are attached to the rotor.

The reason for this extra layer of material is that the CSV-3090H is often used in situations, such as small landscapers and rental centers, where the person operating the machine isn’t the same one that paid for it. Combine that fact with a time constraint to get the job done and you get an interesting phenomena occurring. If the knives become dull in the middle of the project, the operator will choose to simply push harder on the branches rather than stop and sharpen the knives. The tri-plate rotor’s design stiffens the front of the rotor in an attempt to prevent damage to the rotor caused by this type of misuse.

An additional benefit of the extra material is that it increases the weight and momentum of the rotor which translates into faster and smoother chipping.

It merits taking a moment here to point out that any wood chipper that uses chipping knives is designed to process FRESHLY CUT BRANCHES. The chipping knives are able to slice through this fresh material which makes for smoother, faster, easier chipping. We realize that everyone gets the occasional dead branch that falls out of a tree that needs to be chipped and the unit can handle those occasional branches. However, you will be sorely disappointed if you are intending to purchase this chipper to get rid of that mountain of nearly petrified wood that your spouse has been nagging you about for years.

While the chipper knives do their job with a touch of finesse, the y-hammers (painted blue here for ease of identification) are the bullies of the chipper shredder rotor. These six thick, heavy, hardened pieces of steel will beat and tear apart material dropped in the hopper. Dried leaves will be pulverized and slightly greener materials will be beaten to a pulp. Working together, the y-hammers provide a volume reduction of about 8:1 for leaves.

Click here to see Patriot chipper shredder output samples

Commercial Grade Power Source

The CSV-3090H has a powerful 9 hp Honda GX series commercial grade engine that allows you to chip a 3 inch diameter branch into tiny coin-sized chips. Don’t be fooled by the “implied” one horsepower difference between the CSV-3090H and the CSV-3100B. Run side-by-side there’s no way you’d say the CSV-3090H has less power. It’s reliability and performance are why it’s the number one choice of rental centers, professional landscapers, and municipal work crews. It is designed to run all day long.

Greasable Outboard Bearing

The greasable outboard bearing is one of the key features in the success of Patriot’s direct drive chipper shredder design. The bearing supports the outer end of the rotor shaft and takes a significant amount of weight and stress off of the engine shaft. Less stress on the engine shaft translates into smoother chipping and longer engine life.

NOTE: THE OUTBOARD BEARING OF YOUR PATRIOT WOOD CHIPPER SHOULD BE LUBRICATED AFTER EVERY 20 HOURS OF OPERATION.

Direct Drive

Thanks to the use of our outboard bearing, Patriot is able to attach the rotor directly to the engine shaft. Most importantly this means more power! By not transferring power between belts and pulleys we do not lose power between the engine and the rotor. This also translates into no belts to break, fewer parts, less weight, and a more compact design.

Compact Size

Patriot’s chipper shredder design is very compact. At 24″ wide, 35″ long, and 37″ high, the unit requires little more space in your garage than a typical garbage can. The Patriot CSV is also small enough to fit into common vehicles such as mini vans and SUVs.

Light Weight

Weighing only 149 pounds the Patriot chipper shredder is one of the lightest units available. This makes the unit much easier to maneuver around your property or load into a vehicle for transport.

Side Discharge

Patriot’s chippers discharge processed material out of a side discharge on the unit. Use the convenient standard collection bag provided to collect the processed material and carry it to the location of your choice. If you prefer, the airflow through our unit will allow you to discharge the material a few feet away from the machine such as into a tree line.

Most of our competitors simply discharge the processed material into a pile on the ground at the base of the unit requiring it to be collected and moved in a separate operation.

Standard Collection Bag Included

Patriot provides a standard collection bag with all of its chipper shredders. This makes cleanup a breeze and allows you to easily transport the material you’ve processed.

Most of our competitors make you purchase a collection bag as an accessory, if they even offer one.

No Screens Required

Patriot’s chipper shredders turn your yard waste into fine mulch or composting material without the use of messy screens. This means no extra parts to keep track of and no screens to get clogged.

Click here to see Patriot chipper shredder output samples

Need Another Opinion?

Sure we’re a little biased about how great this unit is, but don’t just take our word for it.

Click here to review ALL of Patriot’s customer reviews and testimonials

Minimal Assembly Required

Our products are designed with the average homeowner in mind. The CSV-3090H ships via UPS or FedEx Ground in two packages. The first package contains the factory assembled lower mechanical portion of the unit. For shipping purposes, the shredder hopper and chipper cone are shipped separately. There are only a few screws and nuts to install to finish assembling your unit. Assembly is very simple and typically takes 15 to 30 minutes. Detailed instructions are provided.

Click here for detailed electric wood chipper leaf shredder assembly instructions.

Generous Warranty and Patriot’s Promise

Patriot’s goal is to provide top-notch products and back them up with a generous warranty and superior customer service. The CSV-3090H comes with a 3-year warranty for residential use. If you purchase a product factory direct from Patriot Products, Inc. you may return it for a full refund within 90 days if you are not completely satisfied.

Click here for additional details

Service/Warranty Repair

Because our products are designed with the average homeowner in mind, you can typically handle the routine maintenance of the machine without the need to take it somewhere for service.

If you need assistance servicing the machine or in the unlikely event that you need a warranty repair, the best thing to do is contact us first. While we have dealers and service centers that are familiar with our products, we can work with you to find a reputable outdoor power equipment center close to you that can service your product.

Still Have Questions?

Don’t despair, call us at 1-800-798-2447 or email us at info@patriot-products-inc.com

We want you to have all of the facts so that you purchase the product that is right for you.

Chipper Reviews

Click here to review ALL of Patriot’s customer reviews and testimonials

CSV-3090H – 4 out of 5 stars – Patriot Customer Review – Posted 04/11/23

Replaced a 25-30 year-old Troy chipper that had internally destructed and for which replacement parts are unavailable. Throughput of Patriot is lower and requires more care to avoid jamming debris. Positives: Instructions for assembly and operation uncommonly good. Chipper relatively light weight and easy to move around. So far, materials seem durable. Suggested improvements: Better design to attach the collection bag. Design consideration for engine maintenance (e.g., oil change)

Note in addition to, but not part of, the above: Initially discouraged on delivery. Driver merely left the packaged shredder at rear of garage – blocking in my auto – and did not bother to announce the delivery. Perhaps this was because one edge of the main package was crushed and the “up” arrow on the box pointed directly down. This required me to modify your otherwise excellent un-packaging instructions. The upside was that your packing did prevent damage to the shredder.

By James, Saint Paul, MN

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 04/10/23

There is a learning curve to using the machine and not clogging it with leaves, particularly if they are a little moist. Also, I often need to use a plunger to clear the hopper when shredding.

By Randy, Rockport, MA

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 04/10/23

My Patriot Chipper Shredder is my most cherished piece of equipment that I own. It is super awesome!!! I like showing people how it eats up anything you feed it. The only things that I have found that it does not do well chipping is leafy, very hydrated materials like banana trees or palm fronds.

I did have a scary accident one day where I left the collection bag on top of the shredding housing with the unit running full speed and the collection bag got sucked into the shredding housing.

The extreme torque caused the unit to jump into the air and do a complete circular flip. That was very scary!!! The only thing that got damaged was the bolt that is used to attach everything to the motor. I had to take it to a repair shop to remove the bolt because it was bent and I could not remove it with the tools I had. For suggestions on how to fix it, I called Customer Service. I ended up drilling and tapping the hole using a larger screw.

By Mark, Kingwood, TX

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 03/25/23

Extremely satisfied with my made in USA Patriot CSV-3090H chipper/shredder. Easy to start requiring only 1-2 pulls (great for 56 year old like me). Machine used for chipping branches up to 2in diameter and twigs. Used 5 times with no issues. Makes great wood chips. Pet peeves:
1) Difficult to attach hopper bolts on front side of machine during assembly
2) Difficult to keep collection bag from flying off during use
3) Difficult to use oil fill (doesn’t anyone make real dipsticks anymore?)

By George, Shelton, CT

CSV-3090H – 4 out of 5 stars – Patriot Customer Review – Posted 03/17/23

This chipper is great to hook up to my UTV and move around the estate and use where I need it. Has reliably started every time. I’m just an old lady, and have no issues starting and running it. Has not failed to do anything it was asked to do!

By Rose, Waupaca, WI

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 03/16/23

Fantastic tool, I have enjoyed working with my chipper for almost 10 years and other than replacing the blades and 1 bearing it has preformed beyond expectations.
I chip mostly pine branches, and pine cones for bedding in our chicken yard which helps with smells and makes great
Compost.

By Joe, Morgantown, NC

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 03/02/23

After a short familiarization, the machine performed flawlessly. Normal maintenance includes greasing the rotor bearing, sharpening the knives at the correct angle, and changing the engine oil per the owner’s manual. Shredder stage must be “fed” carefully with reasonable amounts of dry material to prevent overloading. Gas tank fill port was a bit hard to access, but I devised a hose-and-funnel arrangement, which works very well. A powerful machine that stores easily in a corner, and is USA made.

By John, Lake Wylie, SC

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 03/02/23

I had some issues with the chipper when I first bought it in the customer service I received was excellent. I can count on this to meet all of my half acre yard needs and an extensive garden in a woodland setting. It is superb. I would buy another one, if I would ever need it, and I certainly recommend this to everyone else.

By Gerald, Austin, TX

CSV-3090H – 4 out of 5 stars – Patriot Customer Review – Posted 03/02/23

I would give it 5 stars if the chipper knives were a better quality cutting steel. I had to change them out after about 3 hours of use when I first got the machine. I had them sharpened and have used them another 3 hours and they’re dull again. After contacting customer service, sending photos, and explaining I was chipping green pine branches, some elm branches and green willow cuttings, they sent me a new set of knives under warranty. I Have installed them and so far have about 2 hours on

By Allen, Caldwell, ID

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 02/24/23

I carefully researched many brands, and bought the larger 9 horsepower Honda engine model on the advice of a man I visited who lives about 3 hours away. He showed me how his chipper / shredder worked, and ran some branches through it. He had tried other brands, and was quite satisfied with this model as the best for the power to handle bigger jobs. He had been using it for years in his large garden and yard with trees, with relatively low maintenance. I even emailed him several times to remind me of the brand, as it was several years before I could afford it. It has been very useful on my small acreage, creating lots of mulch from tree prunings and brush clearing. Keith has been very helpful to answer my questions, for example, how to properly use and sharpen the blades – I’ve bought several sets. I feel very blessed to have purchased the chipper/shredder when I did, as the price has since been increasing – quite likely due to inflation, supply issues, and price of parts.

By Paul, Rathdrum, ID

CSV-3090H – 4 out of 5 stars – Patriot Customer Review – Posted 03/08/15

Honda engine: excellent; starts easily, no repairs, oil changes only in many years

Chip/Shredder: very good. Would be excellent except; 1. debris catches where plastic chute meets bottom (exit side), sometimes jams in under edge, hard to remove 2. plastic “guard flap” on top wore out quickly, just hangs in & does nothing 3. diss-assembly to sharpen chipper blade is way to complex! Big job for me, & haven’t found a repair shop nearby that will do it….

4. Maybe not really a design fault, but here in the PNW, we often have no chance to shred dry leaves; shredded wet leaves (no matter HOW slowly you feed them) will gradually plug the outlet, so you have to shut down to clear & or (if caught in time) run water thru it pretty often

FYI: I have a suburban yard with many trees. Also chip fo a neighbor’s similar yard debris. Yard debris pick up is of insufficient volume and is costly. Thank you for your product.
By Lance, Battle Ground, WA

CSV-3090H – 4 out of 5 stars – Patriot Customer Review – Posted 02/21/15

Overall I am very happy with the Chipper Shredder, prior to this I had multiple problems with a Troy Built system from Lowes.

I am pleased to say that this unit starts and runs every time it seems to shred everything I throw at it, it does take a little training to learn how to feed each type of material, Branches, Leaves etc, but once mastered it completes what I need in short time.
By Stephen, Folsom, CA

CSV-3090H – 5 out of 5 stars – Patriot Customer Review – Posted 02/21/15

-that the screws on the blades seize up and you sometimes have to drill them out

-when you feed a max diameter piece, hang on and yet be ready to let go so you don’t get sucked in too…great power!

-recommendation of some spare parts to have on hand.

-that the chipper/shredder is so good that the neighbors want to use it

-don’t feed too many pine/spruce boughs at one time.

-thought the chips would have been larger.

-customer service after purchase was excellent.
By Rod, Beaver Cove, NS Canada

CSV-3090H – 4 out of 5 stars – Amazon Customer Review – Posted 09/14/14

I have put more than 80 hours on this unit and, overall, I am very pleased. The way that it makes branches “go away” by turning them into chips is “magic”.
Here are my “Pros” and “Cons”:
PROS
– The unit always starts with one pull. This is great for an older-timer like me.
– Some have commented that the unit bogs down with larger branches. It does, but some decrease in RPM is expected as the feed speed increases or the branch diameter exceeds one inch. Although you can feed a three-inch branch through the unit, you really must be reasonable concerning performance expectations for a unit of this size. For its size, it works just fine.
CONS
– Blade hardness could be improved. It was not defined within the literature that I received; however, you really need to resharpen the blades after 4 hours of use. If you have to chip Manzanita, the blades dull more quickly, so plan to chip these at the end of the day so that the blades stay sharp and feed rates are maintained. If you have to push the branches into the unit, the blades need sharpening.
I developed a fixture that I used to sharpen the blades using a one-inch vertical belt sander, and this maintains the correct cutting angle and lengthens blade life.
– I experienced a failure with the Rotor Tri-Plate. The welds around the center shaft were poorly executed and eventually failed.
I contact the manufacturer and was very displeased with his response and overall technical competency. Even after I sent him pictures revealing the poorly applied and incomplete weld, he still indicated that I must have been mistreating the unit and that the weld was not at fault.
I ended up buying a new Tri-Plate for $335 and receiving two sets of replacement blades. As a side note, the new Tri-Plate exhibited complete and very robust welds, must more substantial than the unit I received.
I expect that the manufacturer has either adjusted their welding techniques or increased their quality control. Regardless, the whole experience did not reflect the response I expected based on the overall quality of the chipper.
– I have an engineering background and I like to tinker. When I installed the new Tri-Plate, I measured the runout near the edge of the Tri-Plate with a dial indicator. The variation was almost 1/8 of an inch. So, this plate, at high revolutions, was creating a lot of vibration due to the imbalance that this “wobble” produced.
To improve this condition, I created a fixture where I could adjust the the surface positioning around the circumference of the Plate to reduce the runout. I was able to reduce the variation to about 0.015 of an inch. This adjustment reduced the overall vibration of the unit and actually improve feed rate and cutting performance because both blades were addressing the feed material from a similar position.
I suggest that the manufacture develop a more accurate fixture for welding the center shaft, and then make final adjustments to the Tri-Plate surfaces after the welds have cooled. This will reduce the amount of runout, lengthen the Tri-Plate service life, and improve chipping performance levels.
By Joe, Danville, CA

CSV-3090H – 4 out of 5 stars – Amazon Customer Review – Posted 08/13/14

I purchased this unit in 2011 to make better use of the piles of shrub and tree trimmings I create each year from my property upkeep. The well written instructions allowed me to assemble the unit with no problems. Pros: The engine starts well. It does a nice job of chipping brush and small limbs. Cons: In shredding leaves I found it bogs down easily, necessitating a slow feeding process. For limbs, I spend a lot of time pre-trimming to ensure the pieces will fit. The unit is noisy – ear protection is a must. I would recommend getting the tow attachment as moving it on ‘rough’ ground is otherwise difficult. Pay particular attention to the instructions on how to be a happy chipper. Despite the longer “Con” list for me, I still give this product 4 stars as it is well constructed and performed as designed. For my application, I believe I really needed a bigger chipper.
By Sandy, Shirley, IN

CSV-3090H – 5 out of 5 stars – Amazon Customer Review – Posted 08/03/14

Engine starts right up no problems, chips and shreds everything I give it. Makes the best mulch available. Only problem I have is putting gas in the tank.
By Diana, Rifle, CO

CSV-3090H – 5 out of 5 stars – Amazon Customer Review – Posted 07/29/14

This is a workhorse of a machine. It takes humongous piles of old rosemary down to a bagful that easily fits in a garbage can. We have a lot of clean up and clean out to do here and we could not have done it or be doing it without this tough machine! It pulverizes huge palm fronds like butter too!
By SoCal Gal

CSV-3090H – 2 out of 5 stars – Amazon Customer Review – Posted 05/31/14

I’ve used this for about 20 hours now. I’ve noticed that the blades seem duller after this amount of time, which I believe is well under the purported longevity of the blades. It just seems like branches are not sucked into the unit like they were before, they are repelled outward like spears. One actually shot out and jabbed me–was not happy about that, but at least it wasn’t my face. The unit can handle up to 3″, but anything over 2″ it will just shoot back out at you unless you push it hard inward, and it seems the unit cannot really handle that either, so I would consider it a ‘very small branch handling machine’. It can’t handle roots or branches with twists whose angle exceeds 3″, nor can it handle small trees. If you want to chip small branches, I’ve found it best to sent in top-first, by either bundling the small branches or bending the tree in half and leading that into the cone.

Shredding is very uneven. I find I have to re-shred or shred-then chip to get what I want, which is ok.

My main gripe with this unit is that it ended up getting halted by something it couldn’t handle well, I think the leaves and grass clumps and branches were too moist and it clogged. I had to clear it by hand and remove the cone to pull out what was blocking, and then coax it to restart. This was very difficult. Then five minutes later, it did the same. So I wasted about an hour working on fixing the machine itself and about maybe 5-10 minutes actually doing real work. I was unhappy about all of this, and it made me think about selling the unit to some sucker (other sucker), while selling it as a top of the line thing. And then kicking myself for not spending twice as much for a used commercial unit that can chip nearly anything because that’s what I really need.
By hoarselord

CSV-3090H – 5 out of 5 stars – Amazon Customer Review – Posted 04/15/13

ok i read the other reviews…. some folks are really unrealistic…twisted branches..yeah that happens, cut em to fit!! This thing eats everything that fits in it and if it doesn’t fit trim it! It is a beast! and no I’m not affiliated with Patriot Products in any way. Fill it with gas and oil after simple assembly and your ready for business. I highly recommend!!!!!
By William, Elizabethtown, PA

CSV-3090H – 1 out of 5 stars – Amazon Customer Review – Posted 05/10/12

I purchased this Patriot wood chipper product WITH the higher priced Honda motor so i could be assurred of no problems. I bought it for chipping branches, limbs, clean up around the property. It literally bogs down on every branch, and quits running. It will not chip 3″ diameter branches as it claims. If you have a branch that is NO larger than 1″ in diameter and is PERFECTLY straight with no bends or curves whatsoever (have you ever seen a branch like this?) then it might work for you. If you strictly want to shred leafs there are a lot cheaper ways you can go. I wanted this to work because Patriot is an American company and its important to me to buy American. So im very disappointed to give their product a poor review.
By Investment Reader, Portland, OR

CSV-3090H – 4 out of 5 stars – Amazon Customer Review – Posted 12/14/11

The chipper came in two boxes promptly after ordering. All of the parts were there with some extra nuts and bolts. The assembly instructions were excellent. The honda engine started on the first pull, and i chipped up a bale of wheat straw just to see if it worked. nice mulch was produced. i did learn from a quick experience that the bag had to be attached if i wanted to actually collect the shredded material. filler funnels are required to fill both the oil reservior and the gas tank. and a flash light will be required to verify the proper oil level. the oil dip stick is not that helpful.
By Ronald

CSV-3090H – 5 out of 5 stars – Amazon Customer Review – Posted 03/16/11

I purchased this product about a month ago directly from the company. when I called he company after working hours I received a call back right away the next morning and had all my questions answered to my fullest satisfactory. I have been chipping/shredding for several hours a day a few times a week and had no problems at all. It started with the first pull and I (woman) have no problem whatsoever operating this. I am very happy to have purchased this and don’t expect any problems with it. Should there be any in the future I am confident that the patriot company will be great in finding a solution. Well done Patriot! This is a great product.

****
Update:
as of June 2013 the shredder is still working as it should. we are very happy with our purchase
By desertordessert , FL

CSV-3090H – 1 out of 5 stars – Amazon Customer Review – Posted 09/14/10

I was really excited about the performance of this chipper for the first 6 hours. After some minor clogging the unit seized up. I cleared the chips from the chipper housing and the unit is still not functional.

The owner of Patriot Products did return my call but was in my opinion not helpful–his knee jerk reaction was that it was probably a problem with the Honda engine (the same engine their company likes to brag about in their literature)and said you need to contact Honda without giving any contact information or help in that area.

This was way too light of duty to have this chipper fail so easily. I wish I had rented–this unit was pricey!
By Haight

CSV-3090H – 5 out of 5 stars – Amazon Customer Review – Posted 04/22/09

The Patriot CSV-3090H Chipper and Leaf shredder exceeded every expectation I had. Right out of the box, a single pull on the rope started the Honda engine. Since then I’ve never had to pull twice to get it going. Once the chipper is warmed up, it eats everything I want to throw at it. Old branches, new branches, old leaves, pine cones and multiple brands of twigs all generate a mulch my wife loves. The best news and first thing I tell friends is the Chipper is made in the USA. (No, it isn’t sold by Walmart). We need more companies like this who still take pride in quality workmanship. Then maybe American-Made can compete again.
By Robert, Richland, WA

5.0 out of 5 stars“Powerful Wood Chipper”

“Ingenuity, simplicity, performance and value.”
Ken Morrison, Power Equipment Trade Magazine

5.0 out of 5 stars“Patriot Chipper Aces Tests”

“The Patriot CSV-3090H Chipper and Leaf shredder exceeded every expectation I had. Right out of the box, a single pull on the rope started the Honda engine. Since then I’ve never had to pull twice to get it going. Once the chipper is warmed up, it eats everything I want to throw at it. Old branches, new branches, old leaves, pine cones and multiple brands of twigs all generate a mulch my wife loves. The best news and first thing I tell friends is the Chipper is made in the USA. (No, it isn’t sold by Walmart). We need more companies like this who still take pride in quality workmanship. Then maybe American-Made can compete again.”

5.0 out of 5 stars “Great product and great customer service from the Patriot company”

“I purchased this product about a month ago directly from the company. When I called the company after working hours I received a call back right away the next morning and had all my questions answered to my fullest satisfactory. I have been chipping/shredding for several hours a day a few times a week and had no problems at all. It started with the first pull and I have no problem whatsoever operating this. I am very happy to have purchased this and don’t expect any problems with it. Should there be any in the future I am confident that the patriot company will be great in finding a solution. Well done Patriot! This is a great product.”

Update: As of June 2013 the shredder is still working as it should. We are very happy with our purchase.”

5.0 out of 5 stars “Rugged Design and Compact Profile”

“What sold me on the Patriot CSV-3090H was its rugged design and compact profile. Thanks!”
Mark, Kingwood, TX

5.0 out of 5 stars “Made short work of Brazilian pepper tree prunings”

“Your chipper has made short work of a huge pile of Brazilian pepper tree prunings. A blessing. I’m also very pleased with its performance on dry and small green palm fronds. Thanks for your help.”
Mary, Nokomis, FL

5.0 out of 5 stars “Works amazingly well”

“Your 9hp Honda powered chipper shredder works amazingly well. Also arrived packed amazingly well. I’m very happy with it. Doubly happy as it is an American product. ”
Patrick, Carmichael, CA

Spare Parts

Genuine Patriot Replacement-Parts Specific To The Current: CSV-3090H Wood Chipper Leaf Shredder

Note: Most parts apply to all existing Patriot CSV-3090H Wood Chippers. If you can’t find the part you need listed below, CLICK HERE for a complete list of available Geniune Patriot Wood Chipper Leaf Shredder Replacement-Parts.

CLICK HERE for an Illustrated Parts-Breakdown Specific To The Current: CSV-3090H Wood Chipper Leaf Shredder.

This list identifies all of the parts required to build this product:
Ill. # Part # Click below on the part descriptions to see part details Qty
1 888000034 Engine, CSV, 9 hp, Honda 1
2 300010690 Engine mount/axle, 9 hp 1
3 888000058 Grinder housing, 9 hp 1
4 325002085 Rotor, tri-plate w/1″ bore 1
5 103009035 Y-hammer 6
6 204009045 Y-hammer shaft, gas 4
7 211009075 Spacer A (short, plain) 2
8 211009055 Spacer B (short, w/hole) 2
8B 265001895 Roll pin sleeve B 2
9 211009355 Spacer C (long, w/hole) 2
9C 265001905 Roll pin sleeve C 2
10 810009015 Chipper knife 2
11 303010235 Center plate, 14″ 1
12 302010255 Fan housing, 14″ 1
13 888000179 Leg 1
14 888000085 Chipper cone casting, Pro Seri 1
15 500050515 Shredder hopper, black 1
16 113010395 Discharge deflector 1
17 500050375 Chipper cone, black 1
18 114000345 Shredder hopper guard 1
700060405 Collection bag, std, 24″ x 36″ 1
20 709040005 Wheel, 12″ 2
21 888000194 Bearing, 1″ bore, greasable 1
22 888000031 HHCS, 5/16-24 x 1 1/2 4
23 705520005 HHCS, 5/16-18 x 3/4 2
24 751520005 HHCS, 5/16-18 x 1 3/4 2
25 705720005 BHSCS, 5/16-18 x 1/2 7
26 768800000 FHSCS, 5/16-24 x 1 4
27 888000078 HHCS, 7/16-20 x 5 1/2 1
28 704620005 Lock washer, split ring, 7/16 1
29 705620005 Lock washer, split ring, 5/16 4
30 705320005 SFN, 5/16-18 23
31 888000042 NILN, 1/4-20 8
32 888000028 BHSCS, 1/4-20 x 1 4
33 710620005 Flat washer, USS, 1/4 8
34 700020005 TFSPPH, 14 x 3/4 5
35 717520005 HHCS, 5/16-18 x 3 1/4 1
36 710220005 Lynch pin 1
37 703200005 Roll pin, 3/16 x 3/4 4
38 703100005 Key, 1/4″ sq. x 2″ 1
39 888000193 Greasable bearing shield 1
40 709920005 Push nut, 5/8″ 2
41 800070435V Decal, CSV, danger, vertical 2
42 800070445 Decal, caution, 4″ x 9.625″ 1
43 800070435H Decal, CSV, danger, horizontal 1
44 800070455 Decal, serial number 1
45 800070832 Decal, CSV, size limit, 1/2″ 1
46 888000209 Engine spacer, CSV-3065B, CSV- 2
47 888000136 SHCS, 1/4-20 x 3/4 2
48 888000137 SHCS, 1/4-20 x 1 2
49 888000055 NILN, 5/16-18 1
50 888000037 HHTB, 5/16-18 x 3 1/2 1
51 888000105 Flat washer, SAE, 5/16 2
888000230 Allen wrench, 3/16, 6″ arm 1
719050005 Allen wrench, 5/32 1
700000005 Safety goggles 1

 

You may also like…